Is my surface suitable

 

  • Surface Guide

    Select a flat, smooth, shiny, glass-like surface on which to apply the product.

    Examples of suitable surfaces:


    Glass / Perspex

    Mirror

    Shiny Tiles

    Shiny Fiberglass

    Shiny Marble

    Gloss Finished Metal

    Our products are not suitable on matte, dull, rough, porous, or uneven surfaces.

    Do not use product on unsuitable surfaces. The product will not work over multiple grout lines that you would find in a mosaic or subway tile.

    Examples of unsuitable surfaces:

    Wood

    Unglazed and Matte Tiles

    Concrete/ Brick

    Prefabricated Shower Units

    Painted/ Unpainted Fibreboard, Drywall, or Plasterboard

    Textured, Patterned, Uneven Tiles

    Mosaic Tiles

  • Application Instructions


      Silicone Grip Products (Pre-2026) — How To Use

      Prepare the surface

      • Clean thoroughly with a glass cleaner or alcohol wipe.
      • Remove all cleaning product residue before applying.
      • Ensure the surface is completely dry.

      Apply the product

      • Place onto a suitable surface only — smooth, shiny, non-porous (glass, mirrors, glossy tiles).
      • Press firmly from one side to the other, smoothing out any air bubbles as you go.
      • Do not apply water to the contact surface during installation — this will prevent it from sticking.

      After applying

      • Wait 12 hours before use for best results.
      • Test by pushing down on the pocket or shelf to confirm it is securely attached.
      • Do not overload the product.

      ⚠️ Please follow all instructions carefully. Incorrect use may cause the product to underperform, become damaged, or cause damage to supported items. Take particular care in humid or wet areas.

      Adhesive-Backed Products (2026 Onward) — How To Use

      Prepare the surface

      • Clean thoroughly with an alcohol wipe.
      • Remove all cleaning product residue before applying.
      • Ensure the surface is completely dry.

      Apply the product

      • Peel the backing film off the product.
      • Place onto a suitable flat surface — compatible with most flat tiles, mirrors, and glass.
      • Press firmly from one side to the other, smoothing out any air bubbles as you go.
      • Do not apply water to the contact surface during installation — this will prevent it from sticking.

      After applying

      • Wait 3 hours before use for best results.
      • Test by pushing down on the pocket or shelf to confirm it is securely attached.
      • Do not overload the product.

      ⚠️ Please follow all instructions carefully. Incorrect use may cause the product to underperform, become damaged, or cause damage to supported items. Take particular care in humid or wet areas.


    1. Product specific notes:
      The Jack - Phone Holder

      Do not use to hold tablets, laptops, or any
      device that exceeds 250g/ 9 ounces.

      WARNING: Do not use this product to hold mains powered, electric or electronic device where the device may fall into water, or have water flow onto it. An electric power source in contact with water may lead to damage, injury, or death.

      Shower Drink Holder

      Do not use glass bottles.
      Use for cans only.

      WARNING: Do not use this device to support any item that may break if it falls, including but not limited to glass containers.

       

      Contact us for further enquiries and information.